Facon 8.0"x25" RV Tank Heater Pad with Automatic Thermostat Control, Up to 50 Gallons Fresh Water / Grey Water / Black Water holding Tank Heating Pad, 120Volts AC

Properly sized and installed Facon Heater Pads provide consistent & efficient protection as the first signs of freezing winter weather approach. Model# CW-T825 Brand: Facon Pad size (Inch): 8" x 25" Foam Pad thickness: 3.0MM Volts: 120V AC Power: 84 W Electric Current: 0.7A Lead Wire Lengh: 36'' Built-in Thermostat is set to turn on at: 45°F( + - 5 degrees) Turn off at: 68°F( + - 5 degrees) CAUTION: The heater pad should not get hot to the touch and make sure fluids must be present before turn on the heater pad

• [✅Exclusive Technology] Facon’s world-famous Tank Heater Pads. Heater Pads are Designed and Engineered to protect RV holding tanks, pipes and steps from freezing. Winter convenience of Today’s RV’er. Provides water for RV, Camper, Trailer, Mobile home, Boat, Marine in winter.
• [✅Thermostat Controlled] Simply turn "ON" the 120V power switch when the outside temperature is near to freezing. The heat will transfer to the tank immediately to starts protecting your holding tank from freezing up. Built-in thermostat is set to turn Itself on at 45°F(±5 degrees) and turn itself off at 68°F( ±5 degrees). The heater pad will not heat the tank if the temperature is not near freezing. Turn "OFF" the switch when the outside temperature remains above freezing, or RV is not in use.
• [✅Application] Voltage: 120Volts AC, 84Watt, 0.7A, 2-wires design without plug - convenience for fixed place installation. Red wire=positive (+); white wire=negative (-). Pad size L 25'' x W 8'' works efficiently up to 50 gallon holding tanks, such as fresh water tanks, grey water tanks and black water tanks.
• [✅Easy Installation] This product is single-sided heating, the heating elements was build to the pad with adhesive. Peel off the paper, and then stick the insulation pad with adhesive to the surface of the tank. Ensure the heat can transmit properly, It must be sticked to or wrapped around the holding tank. No item on the pad, heavy pressure on the pad will cause damage to the heating elements.
• [✅User Guidelines] Heater pad must be applied at a minimum ambient temperature of 68°F(20℃), and make sure fluids must be present before turn on the heater pad. Turn off the pad if no water inside the tank. The heater pad is not warm when touch the insulation pad.
• [✅ Warranty] Passed US standard QAI quality certification. We take full responsibility for our products and customer dissatisfaction. Please feel free to contact us for you face any issue with our products